KPH Hydraulic calibration press 8MN - 35MN

Compact press - the all-rounder for cold and hot forming

Due to our many years of experience in modernizing and overhauling presses from various manufacturers and makes, we have extensive knowledge and know the advantages and disadvantages of the various models and designs. We have been able to apply this knowledge to our new developments and have thus developed press series that will be able to withstand the constantly changing demands of the future.

With the compact presses of the KPH series, we have developed a particularly economical and flexible press with press forces from 8 MN to 35 MN for drop forging and cold forming. The presses can be used for both hot and cold work - as fully automatic or manual loading machines as required. They are characterized by high productivity and part accuracy. The four-column monoblock design is compact and space-saving, but also allows access from all four sides and thus offers all degrees of freedom for workpieces and tool handling. A foundation pit is also not required for the KPH series, so that the press is ready for operation at your factory within a few days. Equipped with the most modern and individual control technology, your production will have your all-rounder in no time at all.

If you have any questions, please give us a call or send us an e-mail.

+49(0)7851 9368-0

Technical Data

Presskraft 8 - 35 MN
typ of construction Monoblock cast construction
drive Hydraulic
table sizes 800 mm x 800 mm to 
1400 mm x 1200 mm

Technical data according to customer specification.
Technical data subject to change without notice.



  • Monoblock construction in cast construction (solid construction) -
  • upper piston design
  • Tested and optimized for fatigue strength and deformation with FEM
  • Wear-resistant piston made of hardened quenched and tempered steel
  • Metallic non-contact sealing and guide system
  • Diagonally arranged crosshair guide
  • Maintenance-friendly, precise adjustment of the slide guide
  • Joystick operation with line display or visualisation touch screen
  • Manufactured exclusively from standard components from brand manufacturers
  • Oil-hydraulic compact drive with block hydraulics and cartridge technology
  • Clean operation through OilClean technology
  • Suitable for cold and hot forming
  • Suitable for manual or fully automated insertion work


  • Transfers (transfer systems)
  • robot automation
  • Tool changing systems
  • Table and ram ejectors
  • light barriers
  • skirting boards
  • spraying systems
  • Front and end of line systems